Brock Bucket Elevator




Safe & Reliable Bucket Elevators That Are Easy to Maintain

Brock provides a variety of bucket elevators to help you deliver grain or other material to the farthest reaches of your handling and storage system. From whole grains to feed to fertilizer, Brock helps you get your product where it needs to go.

The Brock bucket elevator line is designed with the operator in mind for safety, easy maintenance, and trouble-free operation. Brock offers standard bucket elevators up to 60K BPH and custom sizes up to 80K BPH to meet your specific needs.

Highly Durable and Reliable Design

  • Solid-welded flange connections provide extra durability. Brock equipment is not stitch-welded like some of the competitors.
  • Boot hoppers available with 1/4-inch (6.4 mm) abrasion resistant steel liner on BE36 to BE48 models. Optional on BE18 to BE30 models.
  • Pillow block bearings on head and boot resist deflections and don’t transfer heat like flange bearings. Meets NFPA code requirements.

Minimized Back-Legging

  • The bonnet discharge throat and profilehelps elevated materials to discharge properly and minimize material that travels back down the return leg (back-legging).

Engineered for Easy Assembly and Maintenance

  • Trunking components are fixture welded to ensure square and parallel trunking for easy field assembly.
  • Removable inspection doors on both sides of the up casing aid quick installation and maintenance of belting and buckets.

Other Features and Options

  • Brock’s gravity take-up boots are offered with 18-, 24-, 30-, 36-, 42- and 48-inch (457-, 610-, 762-, 914-, 1067- and 1219-mm) pulleys.
  • Elevator finish can be galvanized or stainless steel.
  • Shaft made of #1045, turned, ground and polished steel. Boot shafts are drilled and tapped for optional motion monitor.
  • Main head assembly has a 1/2-inch (12.7-mm) lip above the frame to provide a dust-tight and weatherproof seal. Split removable bonnet offers easy access.
  • Adjustable throat baffle is designed for maximum discharge.
  • Wear points in head and bonnet are lined. Available liners include urethane, abrasion-resistant (AR) steel and ceramic tile.
  • Dust-tight and weatherproof shaft seals.
  • Inspection and maintenance ports have gasket seals.
  • Belting can be furnished in PVC or rubber.
  • Screw take-up is standard in the boot section. External gravity take-up is optional.
  • Safety cable is standard on all head access doors.
  • Many other options available: service platforms, ladders, safety cage, guy brackets and explosion relief vents.
  • Optional stainless steel elevator boot feet are ideal for pit and other corrosive environment applications.

Optional Accessories


  • Durable Belt Fastener with “one size fits all” belts and pulleys. Each splice set joins a 2-inch (50.8-mm) wide belt area.

Elevator Head and Legging Explosion Relief Panels

  • Relief panels release pressure from possible explosion. Safety cable prevents panel from falling.

Elevator Belt Speed Monitor

  • The speed monitor mounts to the elevator boot shaft to detect slowdown in belt speed, indicating a plug situation. Available in single set point and dual set point, less control cable.

Bucket Attachment Hardware

  • #1 Norway Elevator bucket bolts with nuts are sold (in quantities of 100) in 1-inch (25.4-mm) through 2-inch (50.8-mm) long, standard and fanged variety along with 1/4-inch (6.4-mm) and 5/16-inch (7.9-mm) lock washers, flat washers and hex nuts are available.

Elevator Boot Hopper Magnet Option

  • High intensity magnet is mounted in elevator boot hopper to remove tramp metal. Quick release clamps allow for easy cleaning.

Elevator Belting

  • PVC (standard) or rubber (optional) belts are available.

Elevator Buckets

  • Polyethylene buckets standard. Metal, urethane or nylon buckets are optional. Bucket venting optional for fine or light weight products.

Urethane Liners

  • High quality urethane liners with expanded metal backing are available in: 1/4-inch (6.4-mm) urethane, 1/4-inch (6.4-mm) ceramic chip urethane or 5/16-inch (7.9-mm) high energy urethane.


  • Motors up to 150 horsepower are available from stock. Motors are 1725-1800 RPM 60 Hz and 1450 RPM 50 Hz, three phase. Enclosures are TEFC or Explosion Proof, Class II, Group G.

Boot Shovel Hopper 

  • A boot shovel hopper is available on all Brock bucket elevators. The shovel hopper has a hinged cover and a grate over the opening. The shovel hopper is located on the down leg side.

Boot Pulleys

  • Elevator pulleys are available in drum, winged and spiral winged styles.

Pulley Lagging 

  • Heavy-duty slide lagging (SOF Style 5) slides into retainers which are welded onto the pulley.

Gravity Take-Up Boot 

  • Gravity take-up for automatic belt tension is available on all Brock bucket elevators. Included is a weight box and alignment bolts for tracking the elevator belt.

Self-Cleaning Boot

  • Self-cleaning boot holds close clearance between boot bottom and cups at all times.

Bucket Elevator Machinery Arm

  • Mounts directly to head section. Available in 1,000-lb. (454-kg) and 1,500 lb. (681 kg) capacities.


Advertised Price Includes:

- Base Bucket Elevator

- Guy Bracket Kit

- Boot Hopper

- Elevator Drive Package

- Backstop Assembly

- Premium Electric TEFC Motor

- Head Service Platform Kit

- Distributor Platform Kit

- Side Step Platform Kit

- 20 Foot Side Step Ladder & Cage Kit

- 10 Foot Head Ladder & Cage Kit

- Discharge Transition


Extra Information