Description
Save even more on mill-duty grain handling parts and accessories at Grain Handling Direct.
This listing is OEM Nolin Milling equipment sold and supported by Grain Handling Direct. Configure size, gauge, lining, and finish on this page and check out here — no need to go elsewhere to order.
These fittings are mill-duty steel fabrications for dry bulk material handling: spouting, valves, slide gates, adjustable spout ends, and industrial ductwork for air and dust systems. Construction uses laser cutting, high-definition plasma, computerized rolling, automatic seam welding, press brakes, and stamping so parts match the spout and gate patterns used throughout the grain industry.
Technical Specifications
Sizes are outside-diameter (round) or outside width (square) unless noted. Select diameter/size, gauge, lining, and finish on this page; price, weight, and freight cube update with the option set.
Finish: Primed gray (Sherwin-Williams shop-coat primer) carbon steel.
Cyclone collector. Three-piece construction (barrel, cone, top) for shipping and assembly. Angle-ring flanges on the barrel and cone top use national-standard punching and can take support steel. Inlet and first-impact area lined with the same gauge as the shell. Optional 7 ga AR liner on the impact side of the inlet and first 180° of barrel. Top removes for wear-plate service. Primed gray standard.
Typical dimensions (inches) and 12 ga weight (lb):
| Barrel | CFM | Barrel ht B | Cone C | Overall G | Wt 12 ga |
|---|---|---|---|---|---|
| 30" | 1,580 | 18" | 48" | 90" | 320 |
| 36" | 2,750 | 20" | 60" | 104" | 440 |
| 42" | 3,750 | 24" | 70" | 118" | 580 |
| 48" | 4,600 | 28" | 80" | 132" | 730 |
| 54" | 6,000 | 32" | 86" | 142" | 900 |
| 60" | 7,300 | 36" | 98" | 168" | 1120 |
A 30" cyclone is ~90" tall assembled and about 320 lb in 12 ga — ships in sections. Dust systems need ≥4,000 FPM in horizontal duct to keep dust airborne; even diameters cost less than odd sizes.
Lining materials. Catalog options: 1/4" cloth-back blue urethane; 5/16" cloth-back orange urethane; expanded-metal-backed blue / orange / ceramic-chip urethane; 7 ga AR plate; 1/4" AR plate; 4"×6" × 1/4" or 1/2" ceramic tile; 6"×6" hex tile sheets. Expanded-metal-backed blue urethane is the preferred liner for most grain. AR is specified for high-impact zones. Tile is used on the most severe wear. Cup bolts (1/4" × 1") fasten urethane. Tile uses a matching resin kit (about 300 of the 4×6 tiles per kit). Sheet goods ship rolled or flat; a 4'×10' urethane roll is a 48" × 12" × 12" class freight piece.
Capacities assume clean, dry whole grain at 40° or steeper. Wet corn should be spouted at 45° minimum. Lining and fittings reduce capacity. Use these figures as planning guidelines and confirm the selection for your application before you order.
