Description
Save even more on mill-duty grain handling parts and accessories at Grain Handling Direct.
This listing is OEM Nolin Milling equipment sold and supported by Grain Handling Direct. Configure size, gauge, lining, and finish on this page and check out here — no need to go elsewhere to order.
These fittings are mill-duty steel fabrications for dry bulk material handling: spouting, valves, slide gates, adjustable spout ends, and industrial ductwork for air and dust systems. Construction uses laser cutting, high-definition plasma, computerized rolling, automatic seam welding, press brakes, and stamping so parts match the spout and gate patterns used throughout the grain industry.
Technical Specifications
Sizes are outside-diameter (round) or outside width (square) unless noted. Select diameter/size, gauge, lining, and finish on this page; price, weight, and freight cube update with the option set.
45° dead stop (removable end). Turns flowing grain from an inclined spout into a vertical drop while building a cushioning pile. Square Z-style units use a 1/4" black-rubber cushion on the back plate at ~40° with baffles below the angle of projection. Removable end plate for clean-out. Construction commonly 7 ga carbon or galvanized with optional AR / urethane / tile liners.
Typical body dimensions (Z-square 45° dead stop):
| Size | Offset B | Length C |
|---|---|---|
| 6" | 1-3/8 | 13-1/2 |
| 8" | 2-1/4 | 17-1/4 |
| 10" | 2-3/4 | 21 |
| 12" | 3-1/4 | 25-1/2 |
| 14" | 3-7/8 | 29-1/8 |
| 16" | 4-3/4 | 32-3/4 |
| 18" | 5-3/8 | 36-1/2 |
| 20" | 5-7/8 | 40-1/4 |
| 22" | 6-3/8 | 43-7/8 |
| 24" | 7-1/2 | 47-3/4 |
Round 45° dead stops use a removable end and ship as a compact fitting approximately (OD + 8") × (OD + 8") × 18–28" long depending on size.
Construction. Laser-cut and plasma-cut carbon, galvanized, or 304 stainless from 14 ga through 1/4" plate. Seams welded; flanges punched to the standard patterns used on this product family. Custom hole layouts are available. Typical capacity guidelines use ~70 BPH per square inch of interior area for 8" and larger spouts on clean corn, soybeans, or wheat at 40° or greater. Target grain velocity under 1,750 FPM to limit kernel damage and premature wear .
Available option families include diameter/size (commonly 4"–24", some gates to 36"), gauge (14, 12, 10, 7 ga, 1/4" wall), lining (none, 7 ga AR, 1/4" AR, blue urethane, orange urethane, ceramic-chip urethane, ceramic tile), and finish (primed gray, galvanized, stainless).
Capacities assume clean, dry whole grain at 40° or steeper. Wet corn should be spouted at 45° minimum. Lining and fittings reduce capacity. Use these figures as planning guidelines and confirm the selection for your application before you order.
